P1Hydraulic pumps and motors
Fault diagnostics, bench testing, repair and sourcing of equivalents.
Call+370 686 94743How we repair
Complete hydraulics repair
Cylinders, pumps, motors, valves, hoses and complete systems. We diagnose, repair and manufacture. In Panevėžys since 1999.
What we repair
The whole hydraulic chain in one workshop, from finding the fault to making a new part.
C1Hydraulic cylinders
Inspection, repair and manufacture to individual order.
Call+370 686 94743How we repair
H1Hydraulic hoses and fittings
Repair and manufacture to individual order.
Call+370 686 94743How we repair
G1Hydraulic systems
Diagnostics, inspection and repair of the whole system.
Call+370 686 94743How we repair
F1Parts and manufacturing
We sell hydraulic parts and make components from a drawing or a sample.
Call+370 686 94743
L1Turning work
Turning of parts up to 4.5 m long and 380 mm in diameter, made to order.
TurningHow we repairWhy repair instead of buying new
A failed cylinder or pump doesn't mean you need a new one. Most of the time it can be rebuilt.
Lower cost
A repair usually costs far less than a new unit: only the worn parts are replaced, while the body, rod and fittings stay.
Back to work sooner
A new unit from the manufacturer can take weeks to arrive. The repair is done right here in Panevėžys.
Fits with no rework
The rebuilt unit is the same one that was on your machine: no adapting mounts, ports or hoses.
When it's no longer made
Parts for older machines are often discontinued. We find an equivalent or make the part from a sample.
The cause gets fixed
First we find out why the unit failed. A new unit fitted without fixing the cause can fail again quickly.
Less waste
The steel body and rod stay in service instead of going for scrap.
Call before you buy new Tell us what failed and we'll assess whether it's worth repairing.
Call+370 686 94743Turning up to 4.5 metres
We make the part from your drawing or from the original you bring in, when it is no longer available or costs too much.
How we work
Diagnostics
We find the cause of the fault, not just the symptom.
Bench testing
Pumps and motors are tested on the bench before and after repair.
Repair or manufacture
We replace seals, restore worn parts or make new ones.
Back to work
The unit comes back tested and ready to fit.
Which machines
We work on the hydraulics of construction, agricultural and industrial machinery.
- Excavators
- Loaders
- Tractors
- Combines
- Lifts
- Industrial equipment
We repair hydraulics on every make
Whatever the brand, hydraulics work on the same principles. Here are some of the makes we repair.
Construction machinery
- Caterpillar
- Komatsu
- Volvo CE
- JCB
- Hitachi
- Liebherr
- Hyundai
- Doosan / Develon
- Case
- Kobelco
- Takeuchi
- Kubota
- Bobcat
- Wacker Neuson
- Yanmar
- Terex
- Mecalac
- Sany
Agricultural machinery
- John Deere
- CLAAS
- Fendt
- New Holland
- Case IH
- Massey Ferguson
- Valtra
- Deutz-Fahr
- Zetor
- Belarus (MTZ)
- Kuhn
- Amazone
- Lemken
- Horsch
- Krone
- Pöttinger
Forestry machinery
- Ponsse
- Komatsu Forest
- John Deere Forestry
- Rottne
- Logset
- Kesla
Lifting and warehouse equipment
- Manitou
- Merlo
- JLG
- Genie
- Haulotte
- Linde
- Toyota
- Jungheinrich
- Still
- Hiab
- Palfinger
- Kramer
Hydraulic components
- Bosch Rexroth
- Parker
- Danfoss
- Kawasaki
- Eaton
- Linde Hydraulics
- Casappa
- Bondioli & Pavesi
- Sunfab
- Poclain
And any other make. If yours isn't listed, call us anyway. +370 686 94743
Since 1999
UAB Hidrorema was founded in 1999 in Panevėžys, Lithuania. We repair, manufacture and machine hydraulic components for construction, agricultural and industrial companies in Lithuania and neighbouring countries.
- UAB Hidrorema
- Complete hydraulics repair
- founded
- 1999
- years in hydraulics
- 27
- rating on rekvizitai.lt, 32 votes
- 8,1/10
- Company code
- 248330180
- VAT code
- LT483301811
How we repair hydraulics
We describe how each hydraulic unit is repaired at our workshop in Panevėžys, from the first signs of a fault to returning the tested unit. If you can't find your case here, give us a call.
- C1Hydraulic cylinder repair: how it worksHow a hydraulic cylinder is repaired: inspection, dismantling, measuring, barrel honing, making new rods and barrels, seal replacement and pressure testing.
- P1Hydraulic pump and motor repairHow we repair hydraulic pumps and motors: diagnostics, bench testing before and after repair, part replacement and equivalents when originals are discontinued.
- V1Directional control valve repairHow a directional control valve is repaired: diagnostics, dismantling by section, checking and replacing spools, springs and seals, assembly and testing.
- H1Hydraulic hose manufacturing and repairHydraulic hoses made and crimped on site in Panevėžys: we make a hose from your old one and sell hoses and fittings. When to replace a hose and what to bring.
- G1Hydraulic system fault diagnosticsDiagnosing hydraulic system faults: when it's unclear which unit failed, we check the pump, valves, directional control valve, cylinders, hoses, oil and filters.
- L1Turning work: parts up to 4.5 m and Ø380 mmWe turn parts up to 4.5 m long and 380 mm in diameter in Panevėžys: cylinder piston rods, barrels and other parts from a drawing or a sample.
Frequently asked questions
Do you repair machines from every manufacturer?
Yes. We repair the hydraulics of construction, agricultural, forestry and lifting machinery from every manufacturer, as well as individual hydraulic components.
How large a part can you turn?
We turn parts up to 4.5 m long and up to 380 mm in diameter, from a drawing or the sample you bring in.
What if the part is no longer made?
We find an equivalent or make the part from a drawing or the old sample.
Do you test pumps and motors?
Yes. Hydraulic pumps and motors are tested on the bench before and after repair.
Do you sell hydraulic parts?
Yes, we sell hydraulic parts and make components to individual order.
Where are you and when are you open?
J. Janonio g. 3, Panevėžys, Lithuania. Open Mon-Thu 8:00-17:00, Fri 8:00-16:00. Call +370 686 94743.
Do I need to bring the whole machine?
Not always. If you can, bring in only the faulty unit, such as the cylinder or pump. Not sure which one failed? Call +370 686 94743 and we'll advise.
Do you make hydraulic hoses to order?
Yes. We repair and make hydraulic hoses and fittings to individual order.
Can I send a part from another country?
Yes. Customers also send parts for repair from other countries. Call +370 686 94743 before shipping and we'll agree the details.
- Phone
- +370 686 94743
- hidrorema@gmail.com
- Address
- J. Janonio g. 3, LT-35101 Panevėžys, Lithuania
Open in maps - Working hours
- Mon-Thu 8:00-17:00, Fri 8:00-16:00
- facebook.com/hidrorema
- Company details
- Company code 248330180
VAT code LT483301811
The map loads from Google.